The best 3D printed pegboard accessories are short, stubby hooks, which hold just as reliably in IKEA Skadis slots and do not tear out, according to Slant 3D, a YouTube channel run by a print-farm engineer.
Skadis add-ons are among the most printed shop files, and full printable wall systems such as Multiboard go further. Distracted by Design, a YouTube channel about maker builds, load-tested a custom printed storage wall with a full 2-gallon bucket and a chair.
This guide covers the main pegboard systems, what to print, and how to design hooks that hold. For the wider garage, see 3D prints for garage organization.
Which 3D Printed Pegboard System?
Prices checked on Amazon Oct 16, 2026. I may earn a commission from links, at no cost to you.
| System | What it is | Best for |
|---|---|---|
| Standard pegboard (1/4 in holes) | Hardware-store board; print your own hooks | Cheap, everywhere |
| IKEA Skadis | Slotted board; huge library of printed add-ons | Desks, craft and electronics |
| Multiboard | Fully printable modular wall system by Jonathan Kobylanski | Building a whole wall from prints |
| Fully printed pegboard tiles | Print the board itself | Small spaces, labs |
Best 3D Printed Pegboard Accessories
- Screwdriver and plier racks
- Bins and cups for bits and small parts
- Tape and spool holders
- Drill and driver holders
- Battery mounts (see battery holders)
- Wrench racks (see socket and wrench organizers)
- Shelves and phone/tablet stands
How to Make Printed Pegboard Hooks Stronger
The YouTube channel Slant 3D showed seven ways to design Skadis hooks. Printed flat, long thin hooks snap at the layer lines; printing on the side with supports can ruin the fit. Their fixes include short “stumpy” hooks that print flush to the bed without supports, designed-in supports, and flexing snap tabs.
| Use | Filament | Why |
|---|---|---|
| Indoor holders and organizers | PLA | Easy, stiff, cheap |
| Parts that get dropped or flexed | PETG | Tougher, less brittle |
| Hot garage, truck or van | ASA (or ABS) | Higher heat resistance; needs an enclosed printer |
| Soft jaws, grips, non-marring tips | TPU | Rubber-like, will not scratch |
Best Printers for Pegboard Prints
| Printer | Price (Amazon, Oct 16, 2026) | Why it fits | Link |
|---|---|---|---|
| Bambu Lab A1 | $299.99 | Ideal for PLA and PETG hooks and bins | Check price |
| Bambu Lab A1 mini | $249.00 (LED lamp kit bundle) | Most hooks fit its small bed | Check price |
| Elegoo Centauri 2 Combo | $328.99 | Enclosed with 4-color for labeled bins | Check price |
What YouTube Creators Found About 3D Printed Pegboard
These are findings from popular YouTube videos, paraphrased from their transcripts and credited. They are the creators’ experiences and claims, not my test results.
- Slant 3D (Slant 3D: “Hacking the IKEA SKADIS Pegboard”) explained that short, stubby hooks hold just as reliably in Skadis slots and don’t tear out. He said designed supports are crisper and cheaper than slicer supports.
- Distracted by Design (Distracted by Design: “I Finally Listened To Adam Savage About Storage”) built a custom wall storage system inspired by Adam Savage’s advice to keep tools visible. He said a screw was more reliable than a hardware-free design and that he added magnets as a fail-safe where tolerances mattered. He load-tested his mounts with a full 2-gallon bucket and a chair.
- MultiBuild (MultiBuild: “The Last 3D Printed Storage System You’ll Ever Need: Multiboard”) presents Multiboard as a full printable wall system.
Another Look: A Printed Storage Wall
Frequently Asked Questions
What filament is best for pegboard hooks?
PETG. It flexes before it snaps, which suits clips and hooks. PLA works for bins and light holders.
Will 3D printed hooks fit any pegboard?
Hooks are made for a specific system. Check the hole size and spacing, standard 1/4 in, 1/8 in, or Skadis slots, before printing.
Is Multiboard better than pegboard?
It is more flexible but means printing the board too. Pegboard and Skadis are cheaper starting points.
Why does my hook break at the base?
Layer lines run across the hook. Print it on its side or use a stubby design.
Sources
- Slant 3D: “Hacking the IKEA SKADIS Pegboard”
- Distracted by Design: “I Finally Listened To Adam Savage About Storage”
- MultiBuild: “Multiboard”
- Seth Altobelli: “3D Printed Pegboard Toolholders”
- Amazon product listings for the printers linked above, October 16, 2026
Related: 3D Prints for Garage Organization | Gridfinity for Beginners | Useful Things to 3D Print for Your Home | PLA vs PETG for Beginners
Notes and disclosure
Note: Printer prices come from Amazon listings on October 16, 2026 and change often. The ideas below come from popular YouTube creators and Reddit threads, credited where used. My own hands-on results will be added after my planned test prints.
Affiliate Disclosure: If you purchase an item through the links on this page, I may receive a commission, at no additional cost to you. Thank you for supporting the channel.