Not every indoor plant gets enough natural sunlight, especially when it sits on a shelf or in a corner of the house. That is the problem I open with in my latest plant-light video, and it is the reason I reached for a compact set of JESLED 10W puck grow lights instead of a large floor fixture. JESLED sent me the two-pack to review, and I used the lights with one of my indoor plants to add some extra illumination.
The footage is a short home demonstration of the compact 4.4-inch design, the 5,000K white light, the five brightness levels, the built-in timer, and the linkable two-light setup. It is not a long-term grow test, and I do not measure light output in the clip. The wattage, spectrum, CRI, mounting hardware, and warranty details below come from JESLED and the Amazon listing, alongside what I show and say on camera.
JESLED sent me these puck grow lights to review. As an Amazon Associate, I earn from qualifying purchases. If you buy through links in this post, I may receive a commission at no additional cost to you.
Screenshots in this post are from my YouTube video.
Puck grow lights at a glance
JESLED sent me these puck grow lights to review. As an Amazon Associate, I earn from qualifying purchases. If you buy through links in this post, I may receive a commission at no additional cost to you.
| Feature | What the sources say |
|---|---|
| Model | JESLED 4.4-inch dimmable puck grow lights, two-pack; listing model JESLED PGL01 |
| Size | Each puck is 4.4 inches across and 1.2 inches thick, according to JESLED and my narration |
| Power | 10W full-spectrum LED per puck (20W for the two-pack), per the listing |
| Color temperature | 5,000K, which I describe in the video as a natural-looking white light rather than purple |
| CRI | 95, according to JESLED; not measured in my video |
| Brightness | Five levels, from 30% to 100%, as I show and as the listing states |
| Timer | 4, 8, and 12 hours, according to both the video and the listing |
| Controls | Individual touch switches plus an inline timer/dimmer controller; the listing also includes a wireless remote (battery not included) |
| Mounting | Four rear magnets, plus adhesive pads, screws, and zip ties in the box, per JESLED |
| Linkable design | Included connecting cables and an ETL-certified power adapter; I show both lights running together |
| Warranty | Three-year manufacturer warranty, according to the listing |
| Price and rating | The Amazon listing was currently unavailable when I checked and did not show a public star rating; confirm live stock and price before buying |
The specification table is drawn from the Amazon listing linked here, from JESLED’s product claims, and from the narration and on-camera demo in my video. The clip itself is the source for the compact size, the look of the 5,000K light on my plant, the brightness and timer controls, and the two-light layout.
What my video shows first: compact lights on an indoor plant
I start by pointing out a common indoor-plant problem: a shelf or a dim corner that does not get enough natural sunlight. In the narration, I say these compact puck grow lights can help in that kind of space. After noting that JESLED sent the set for review, I explain that I decided to use them with one of my indoor plants to give it some additional lighting.
One of the first things I like about the lights is the compact design. Each puck measures just 4.4 inches across, which I call out as a way to avoid taking up much room around the plant. In the footage, a white puck sits on the wall next to the leaves, with a slim power cable running down from the housing. The idea, as I put it in the video, is to add illumination without needing a large grow-light fixture.
A little later I step back and show both pucks mounted one above the other on the same wall, with the connecting cable running between them and the plant standing in a pot nearby. That is the moment I point to on camera when I say, “Right here you can see how I’m using the light with my indoor plant.” The demonstration is about placement and the look of the light in a living space, not about tracking new growth over weeks.
10W full-spectrum light at 5,000K
The lights use a 10-watt full-spectrum design with a 5,000 Kelvin color temperature. In the video, I emphasize that this produces a natural-looking white light rather than the purple lighting people sometimes associate with grow lights. That is one of the clearer visual takeaways from the footage: the pucks throw a bright, daylight-style white, and the plant’s green leaves stay easy to see under it.
JESLED’s listing goes further than the clip. The company describes a balanced 5,000K full-spectrum output intended to support plants from germination through flowering, and it advertises a CRI of 95 so leaf color looks more natural when you are checking plant health. Those are manufacturer statements. I do not measure CRI or light output in the video, so those figures should be read as listed claims, not as results from this demonstration. My footage is also narrower than the listing’s marketing list: I use the lights on a single indoor houseplant in a room corner, and I talk about houseplants, shelves, and small indoor growing areas in the close.
Five brightness levels and a 4, 8, or 12-hour timer
Another feature I like in the video is the adjustable brightness. You get five levels, ranging from 30% all the way up to 100%, so you can control how much light the plants receive. I mention that this lets you match the output to the plant and the room, which is useful when the pucks sit close to the leaves.
There is also a built-in timer with 4, 8, and 12-hour options, which I describe as a way to schedule when the lights turn on and off. On camera, I hold the inline controller while both pucks are lit. The controller has plus and minus buttons for brightness and a timer control, with a small status light visible in the footage. That is the hands-on look at the dimming and scheduling controls in this video.
The Amazon listing adds a few control details I do not narrate at length. Each puck has its own touch switch, the package includes a wireless remote (battery not included), and JESLED describes a power-outage memory function. I do not demonstrate a power cut or the separate wireless remote in the clip, so those remain listing features rather than steps shown in the video.
Two-pack layout, linkable cables, and mounting options
The package includes two puck lights, which I highlight as a practical part of the design. In the narration, I say you can position them around different plants or use them together in the same growing area. My demonstration uses the second approach: both lights share one wall next to a single plant.
I also call out the linkable design, which lets you connect both lights with the included cables and power adapter. That is visible in the wall setup, where a cable runs from one puck to the other, and again when both faces are lit together during the control demo. According to JESLED, the kit includes roughly 2-foot and 4-foot cables (the listing specifies 23.6 inches and 47.24 inches) plus an ETL-certified adapter. JESLED also says each light has four rear magnets, with adhesive pads, screws, zip ties, and magnetic plates in the box. In the video, the pucks are already mounted on the wall, which shows one finished installation, but I do not walk through every mounting method or every piece of hardware on camera.
Who these puck grow lights are for — and what my video does not show
Based on the footage, these lights make the most sense if you want a small, wall- or shelf-friendly way to add white full-spectrum light around a houseplant, rather than bringing in a tall floor lamp or a hanging fixture. I close the video by saying that if you are looking for small grow lights for houseplants, shelves, or indoor growing areas, these JESLED dimmable puck grow lights are worth considering. The compact 4.4-inch size, the 5,000K white light, the five brightness steps, and the 4/8/12-hour timer are the features I actually talk about on camera.
The limits of the video matter just as much. This is a short setup and lighting demonstration, not a grow trial. I do not measure brightness at the leaf, compare the pucks with other brands, or show how a plant responds over days or weeks, and I do not verify the advertised CRI or three-year warranty. Those points come from JESLED and the Amazon listing. When I checked, this exact two-pack was currently unavailable and did not show a public customer rating, so confirm stock and price on Amazon before buying.
How this compares with the JESLED floor light I have already covered
These 10W puck lights are a different product from the JESLED 60W vertical grow light I reviewed earlier. That earlier post covers a floor-standing, side-emitting bar meant for tall indoor plants, with a mechanical timer and a foot switch. This video is about two small, linkable pucks for closer, more compact use around a houseplant or a shelf. They share a brand and a full-spectrum pitch, but they are not interchangeable, and this is not a head-to-head comparison.
Bottom line from my video
My closing impression is that the JESLED puck grow lights offer adjustable lighting in a compact design that works well around indoor plants. I liked the small 4.4-inch size, the natural-looking 5,000K white light, the five brightness levels, the timer options, and the ability to run two linked pucks together.
If that compact two-light setup matches the space you have, check the current JESLED 4.4-inch puck grow lights on Amazon listing for live stock, price, and the full packing list. The video shows how the lights look on an indoor plant and how the dimming and timer controls work; it does not replace a longer grow test or a measurement of output.
Notes and disclosure
JESLED sent me these puck grow lights to review. As an Amazon Associate, I earn from qualifying purchases. If you buy through links in this post, I may receive a commission at no additional cost to you.
Primary sources: my JESLED 10W puck grow lights video and description, and the Amazon product listing linked above. Spectrum, CRI, mounting accessories, cable lengths, ETL, warranty, and availability are attributed to those sources. No independent laboratory measurement is claimed. Prices and stock can change.