3D printed woodworking jigs give you router templates, marking gauges and drilling guides for a few cents of filament, and most of the files are free. You do not need to design anything to benefit, according to Artisan Made, a woodworking YouTube channel that prints jigs for its own shop.
Accuracy depends on the setup. WayofWood, a YouTube channel that designs printable woodworking tools, says its marking gauge only works if you measure the ruler width, thickness and nail diameter precisely before generating the model.
Here are 10 jigs worth printing, with credited videos. For storage on the shop wall, see 3D prints for garage organization.
Top 10 3D Printed Woodworking Jigs
Prices checked on Amazon Oct 16, 2026. I may earn a commission from links, at no cost to you.
1. Router templates
Artisan Made showed printing router templates for handles and shapes. A multi-piece print can be traced onto a sturdier sheet to make a long-lasting one-piece template. He warned that soft sheet material wears at the corners.
Watch: Artisan Made: “How To Make And Use 3D Printed Router Templates”
2. Ruler marking gauge
WayofWood’s customizable gauge clips onto a steel ruler and uses a nail as the scribe. You measure your ruler and nail and type the numbers into a customizer.
Watch: WayofWood: “3D printed marking gauge [Free customizable model]”
3. Self-centering gauge
Finds the middle of a board in one pass. See my 3D printed tools roundup.
4. Speed square and angle guides
Print in PETG with dry filament so the markings are crisp.
5. Bench dogs and stops
Custom-size pegs for any bench hole pattern, imperial or metric.
6. Drilling guides
Guides for 90 and 45 degree holes, shelf pin spacing and pocket holes. Print with high infill.
7. Corner clamp jigs
Hold frames square during glue-up. The YouTube channel Shop Class Solutions shared a modular printed corner jig.
Watch: Shop Class Solutions: “Clamp Smarter: Modular 3D Printed Corner Jig”
8. Ball valve blast gates
Artisan Made printed a free ball-valve blast gate with M4 screws and CA glue and advised setting your drill torque low so it does not crack. More in my dust collection post.
9. Clamp racks
The YouTube channel TodaysCraftsmen redesigned their clamp storage with a printer and shared the file.
Watch: TodaysCraftsmen: “We Redesigned Our Clamp Storage Using a 3D Printer”
10. Carpenter’s tricks with printed parts
John Heisz (I Build It) shares free print files for shop jigs, such as his modern twist on an old carpenter’s trick.
Watch: John Heisz – I Build It: “A Modern Twist on an Old Carpenter’s Trick”
Tips for Printing Woodworking Jigs
- Calibrate first: check a printed 100 mm test against a steel rule before trusting a jig.
- Use PETG or PLA with 4 to 5 walls and 30% or more infill for parts that take clamping pressure.
- Print reference faces flat on the bed for accuracy.
- Do not use printed jigs as guards or anywhere near a blade path.
| Use | Filament | Why |
|---|---|---|
| Indoor holders and organizers | PLA | Easy, stiff, cheap |
| Parts that get dropped or flexed | PETG | Tougher, less brittle |
| Hot garage, truck or van | ASA (or ABS) | Higher heat resistance; needs an enclosed printer |
| Soft jaws, grips, non-marring tips | TPU | Rubber-like, will not scratch |
Best Printers for Woodworking Jigs
| Printer | Price (Amazon, Oct 16, 2026) | Why it fits | Link |
|---|---|---|---|
| Bambu Lab P1S Combo | $549.00 | Enclosed, so ASA and ABS shop parts are practical | Check price |
| Bambu Lab A1 | $299.99 | Great value for PLA and PETG holders and jigs | Check price |
| Elegoo Centauri 2 Combo | $328.99 | Enclosed CoreXY with 4-color at a lower price | Check price |
What YouTube Creators Found About 3D Printed Woodworking Jigs
These are findings from popular YouTube videos, paraphrased from their transcripts and credited. They are the creators’ experiences and claims, not my test results.
- Artisan Made (Artisan Made: “3d Printing For Woodworkers”) stressed that you don’t need to design anything to benefit, since most files are free. He recommended buying a metric screw kit (M4 and similar) because most designers use metric hardware.
- WayofWood (WayofWood: “3D printed marking gauge”) explained that the gauge only works if you measure the ruler width, thickness and nail diameter precisely before generating the model.
More Jig Ideas on Video
Frequently Asked Questions
Are 3D printed jigs accurate enough for woodworking?
For marking, drilling and templates, yes, once your printer is calibrated. Check every jig against a known square or rule.
What filament is best for woodworking jigs?
PETG for toughness, PLA for stiff and precise templates.
Can I use a 3D printed router template directly?
Yes, with a bearing bit, but plastic edges wear. Trace it onto MDF or hardboard for a template you will use often.
Where can I download free woodworking jigs?
Printables, MakerWorld and Thingiverse, plus files linked by woodworking YouTubers.
Sources
- Artisan Made: “3d Printing For Woodworkers”
- Artisan Made: “How To Make And Use 3D Printed Router Templates”
- WayofWood: “3D printed marking gauge”
- WayofWood: “Top 10 3d printing projects for the woodworking workshop”
- Miles McGrew Woodworking: “Functional 3D Prints For Woodworkers”
- Amazon product listings for the printers linked above, October 16, 2026
Related: 3D Prints for Garage Organization | Gridfinity for Beginners | PLA vs PETG for Beginners | Best 3D Printer for Home Use
Notes and disclosure
Note: Printer prices come from Amazon listings on October 16, 2026 and change often. The ideas below come from popular YouTube creators and Reddit threads, credited where used. My own hands-on results will be added after my planned test prints.
Affiliate Disclosure: If you purchase an item through the links on this page, I may receive a commission, at no additional cost to you. Thank you for supporting the channel.