Best 3D Prints for Kitchen Organization and Gadgets (2026)

The best 3D prints for kitchen use are organizers sized to your own cabinets: tea and spice holders, egg dispensers, drawer dividers and bottle racks. The Next Layer, a YouTube channel that reviews useful prints, reorganized his kitchen cabinet by cabinet with the rule that everything should only fit in its own place, so nothing gets put back wrong (The Next Layer, “9 TOP 3D Printed Organizers for Your Kitchen”). Printed plastic should stay out of long contact with food.

Hands On Katie, a YouTube maker channel, used printed shelves and grid systems to free up whole cupboards (Hands On Katie, “DIY Kitchen Organisation: Add 25% Capacity with FREE 3D Prints & Laser Cutting!”), and designer Alexandre Chappel printed hundreds of parts to organize a new kitchen’s drawers (Alexandre Chappel, “How To Organize Your Kitchen With 3D Printing”). Here is what they printed and how to do it safely.

Best 3D Prints for Kitchen Organization

Prices from Amazon at time of writing. I may earn a commission from links, at no cost to you.

The Next Layer’s Kitchen Makeover

The Next Layer set three rules: a place for everything that only fits there, accessibility over maximum storage, and efficient prints, avoiding a kilo of filament where 100 g will do (The Next Layer, “9 TOP 3D Printed Organizers for Your Kitchen”). He found generic organizers, printed or not, turn messy within a week. Highlights:

• Coffee and tea: bulk coffee and yerba mate moved to airtight glass jars on a partial-depth shelf, with printed packet dispensers glued to the door. When the door closes, the dispensers push the jars back into a neat line.
• Bottles: a modular bottle rack that prints on small printers and stacks eight at a time on the bed; he added a dab of glue to the joints.
• Spices: angled printed racks that display spices in IKEA glass jars, using less filament than a grid with slanted bins.
• Fridge: a printed egg roller that holds 15 eggs and keeps the oldest in front, plus a can dispenser.

Hands On Katie’s Gridified Kitchen

Hands On Katie organizes her kitchen with four systems: French cleats for heavy items, Neogrid for pots and pans, Gridfinity for small items and Multiboard on vertical surfaces (Hands On Katie, “DIY Kitchen Organisation: Add 25% Capacity with FREE 3D Prints & Laser Cutting!”). That lets her move things around and try layouts freely. Her ideas:

• Fridge: IKEA SNURRAD turntables with custom Gridfinity grids to group items; a coat of spray lacquer makes printed parts smooth and wipeable.
• Pull-out larders: printed shelves shaped to the baskets’ bumps and grooves, which freed up entire cupboards.
• Spices: sorted alphabetically, by cuisine or by flavor profile, whichever helps you cook.
• Baking cupboard: door-mounted shelves that convert Multiboard to Gridfinity, so items at the back of deep cupboards move to the door.
• Nudges: fruit placed within easy reach and sweets harder to reach.

Alexandre Chappel’s Drawer System

Alexandre Chappel, a designer and maker, printed a base grid that stays put in each drawer, so boxes don’t slide when the drawer moves (Alexandre Chappel, “How To Organize Your Kitchen With 3D Printing”). His kitchen grid uses 40 mm squares, smaller than the 55 mm grid in his workshop, for finer size control, and he offers half-size boxes and filler strips so the grid fills drawers of any size. Large boxes come in split versions for smaller printers and can be glued with CA glue. He also printed a two-part knife holder joined with dowels, with a hidden compartment underneath. For a similar open standard, see Gridfinity for beginners.

Is 3D Printed Plastic Food Safe?

Be careful. Layer lines can trap bacteria, and most filaments, dyes and nozzles are not certified food safe. Use prints for organization and dry storage, not for cutting boards, cups or anything that touches raw food for long.

See PLA vs PETG for beginners for filament choice.

Best Printers for Kitchen Prints

Video: The Next Layer, “9 TOP 3D Printed Organizers for Your Kitchen”. Embedded with credit.

Video: Hands On Katie, “DIY Kitchen Organisation: Add 25% Capacity with FREE 3D Prints & Laser Cutting!”.

3D Prints for Kitchen: Frequently Asked Questions

What are the best 3D prints for the kitchen?

Organizers that fit your space: spice racks, tea dispensers, egg rollers, bottle racks and drawer grids.

Can I 3D print kitchen utensils?

You can, but it is not recommended for anything that touches food often. Layer lines are hard to clean.

What filament is best for kitchen prints?

PETG for anything near heat or water. PLA is fine for dry storage and organizers.

How do I make kitchen prints easier to clean?

Hands On Katie coats printed parts with spray lacquer so they’re smooth and wipeable.

Where do I find kitchen organizer files?

Search MakerWorld or Printables for “kitchen organizer,” “spice rack” or your appliance model.

Sources

• The Next Layer, “9 TOP 3D Printed Organizers for Your Kitchen”
• Hands On Katie, “DIY Kitchen Organisation: Add 25% Capacity with FREE 3D Prints & Laser Cutting!”
• Alexandre Chappel, “How To Organize Your Kitchen With 3D Printing”
• Amazon product listings for the printers linked above, October 16, 2026

Related: Useful Things to 3D Print for Your Home | PLA vs PETG for Beginners | Best 3D Printer for Home Use