3D Printed Bathroom Accessories and Laundry Room Organization Ideas

3D printed bathroom accessories work best in PETG, which Reddit users recommend over PLA for showers and wet areas. Jet L, a YouTube channel whose bathroom gadgets video has over 40,000 views, printed a drain snake that took about 5 g of filament and 20 minutes.

In the laundry room, Jordan Prints, a YouTube channel about home organization, covered a wall with Multiboard, and one set of hooks cost about 31 cents. Carbon Cave, a maker channel, printed a cup holder that catches detergent drips.

Here are the most useful bathroom and laundry prints, and how to make them last around water.

Best 3D Printed Bathroom Accessories

Prices from Amazon at time of writing. I may earn a commission from links, at no cost to you.

• Toothbrush holders, including electric brush stands (see the section below)
• Soap dishes with drainage
• Drain hair snakes
• Quick-change toilet paper holders
• Razor and glasses holders
• Drawer and counter organizers
• Toothpaste squeezers

Laundry Room Organization

• Detergent cup holders that catch drips
• Wall storage with Multiboard or pegboard (pegboard accessories)
• Hooks for brushes and vacuum attachments (3D printed hooks)
• Sock clips and lint-trap holders

Make Bathroom Prints Last

• Design drainage so water cannot pool
• Use 3 to 4 walls for water resistance
• Clean regularly; layer lines trap grime

Best Printers for Bathroom Prints

What YouTube Creators Found About 3D Printed Bathroom Accessories

• Jet L (Jet L: “10 Bathroom Gadgets You NEED To 3D Print Now”) printed a quick-release toilet paper holder, a glasses holder bowl he called his favorite, a minimal toilet stool (about 5.7 hours) and a drain snake that took about 5 g and 20 minutes.
• Carbon Cave (Carbon Cave: “3D Printed Laundry Detergent Cup Holder”) printed a cup holder for bulk detergent jugs so drips land in the cup, not down the bottle. He printed it in PETG and said PLA should work too.
• Jordan Prints (Jordan Prints: “Laundry Room Organization using 3D printed Multiboard”) covered a laundry wall with Multiboard for bottles and vacuum attachments. One set of hooks cost about 31 cents and 40 minutes, by his slicer.
• On Reddit, users recommend PETG over PLA for showers and wet areas, plus drainage holes and regular cleaning.

Laundry Room Multiboard

3D Printed Toothbrush Holders

A 3D printed toothbrush holder can print in about half an hour, as 3D Printing Nerd, a YouTube channel about printing projects, found with a Sonicare holder from Thingiverse.

For anything that gets wet, Reddit users in r/3Dprinting recommend PETG over PLA, plus drainage and regular cleaning. Tinker Time, a YouTube tutorial channel, shows how to design a simple holder in Tinkercad.

Here are the main designs, the right material and how to keep it clean.

Types of 3D Printed Toothbrush Holders

Material and Settings

• PETG for moisture and heat; PLA can deform with hot water
• 3 to 4 walls and 4+ top and bottom layers
• Fine layer heights make it easier to clean
• Open, drained designs dry fastest

Hygiene Tips

• Avoid closed cups where water pools
• Wash the holder often; replace it if grime sets into layer lines
• Separate brushes so heads don’t touch

What Creators Found About Toothbrush Holders

• 3D Printing Nerd (3D Printing Nerd: “3D Printing: Sonicare Toothbrush Holder from Thingiverse”) kept knocking over his toothbrushes, so he printed a Sonicare holder from Thingiverse in about half an hour. He called it useful, effective and approved by his wife.
• Tinker Time (Tinker Time: “How To Make: Toothbrush Holder Using Tinkercad For 3D Printing”) shows how to design a simple holder in Tinkercad, a good first CAD project (we did not review a transcript of this video).
• On Reddit, users recommend PETG rather than PLA for anything that gets wet, with drainage and regular cleaning.

Design One in Tinkercad

Frequently Asked Questions

What filament for bathroom prints?

PETG for wet areas; PLA only for dry spots.

Do printed bathroom items get moldy?

Water can sit in layer lines. Add drainage and clean often.

Can I print a shower caddy?

Yes, in PETG or ASA. Don’t overload printed brackets.

What is the most useful bathroom print?

Creators and users often name drain snakes, toothbrush holders and organizers.

Is a 3D printed toothbrush holder hygienic?

If it drains, dries and is cleaned often. Layer lines can trap grime.

Can I print a holder for electric brush heads?

Yes. Search your brush brand plus “head holder”.

How long does a toothbrush holder take to print?

Simple designs take about half an hour.

Sources

• Jet L: “10 Bathroom Gadgets You NEED To 3D Print Now”
• Carbon Cave: “3D Printed Laundry Detergent Cup Holder”
• Jordan Prints: “Laundry Room Organization using 3D printed Multiboard”
• r/3Dprinting: Prints for the bathroom
• r/3Dprinting: Is 3D printing OK for toiletries?
• Amazon product listings for the printers linked above, October 16, 2026
• 3D Printing Nerd: “3D Printing: Sonicare Toothbrush Holder from Thingiverse”
• Tinker Time: “How To Make: Toothbrush Holder Using Tinkercad”
• Printables: Shower Toothbrush Holder

Related: Useful Things to 3D Print for Your Home | 3D Prints for the Kitchen | 3D Printed Pegboard Accessories | PLA vs PETG for Beginners